New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Mesquite pairs proven product lines with a local vetted installing partner for lasting performance - and a price put in writing.
Choose your installer
The unit is half the job - the install is the other half. Background-checked local installers measure, set, seal and insulate every opening, and they know the lines we quote inside and out.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven lines with short lead times
CGI Door Installation in Mesquite: What to Know First
CGI door installation in Mesquite usually runs $1,450 to $4,800 per opening, depending on door type and whether the existing frame is reused. Most entry door replacements are measured, ordered, and installed in three to five weeks because CGI builds to order at its Miami facility and ships west. As an independent CGI service provider, we sell the door at a written price before work begins – that number is stamped on the survey you keep, and it doesn’t move after the crew arrives.

This page is for Mesquite homeowners who already have a CGI door, or who have decided on a CGI series and want it installed correctly the first time. We also install PGT, CWS, ES Windows, and ECO Window Systems products, but this page stays on CGI. Call (888) 268-5117 for a free estimate.
How CGI Products Fail – and How We Fix Them

CGI doors fail in ways that trace back to the desert, not to bad engineering. Mesquite swings between 110°F summers and nights that drop into the 30s, and a door slab takes that thermal load on one face and not the other. Here’s what we actually find on CGI jobs around the valley, and what we do about it.
- Warped slabs on CGI Estate Collection fiberglass entries. The sun-facing skin expands faster than the shaded side, and over several summers the slab bows until the lock no longer lines up with the strike. We check the slab for flat with a straightedge before ordering, and if the frame is plumb we re-hang a fresh slab rather than shim a bent one and lose the warranty.
- Failed perimeter seals on CGI aluminum storm and exterior doors. The factory gasket on these units hardens and pulls back from the jamb after a few summers, and the first sign isn’t water – it’s a whistle at the hinge side during spring wind. We pull the old seal, clean the channel, and reset it with a sealant rated for the temperature swing.
- Sticking French and double doors after monsoon season. CGI double-door units are built with a specific head-jamb gap, and when the frame shifts slightly on a settling slab, the active leaf starts rubbing the astragal. We measure the reveal top, middle, and bottom on both leaves; the fix is usually adjusting the frame anchor and re-setting the swing, not replacing the door.
- Hardware and threshold wear on CGI coastal-rated entries. The multipoint lock and adjustable sill on these doors are built to tight tolerances, and grit blown in on windy days wears the strike plates faster than coastal buyers expect. We replace with CGI-spec hardware where the warranty requires it and tell you when a quality aftermarket equivalent is genuinely the better part.
- Wrong door ordered for a zero-lot-line home. A lot of Mesquite homes sit close enough to a neighboring wall that a standard 36-inch swing won’t open without hitting the fence. We call that during the survey, not after the slab arrives, and re-spec to an outswing or a narrower unit before the order goes in.
Two details you won’t find on CGI’s site: the door serial number lives on a label on the hinge jamb, and photographing it before demo is what keeps a warranty claim clean. And a slab that measures right but won’t latch is almost always a frame-out-of-square problem, not a door problem – worth knowing before anyone talks you into a new unit.
Before
AfterOur CGI Door Installation Process
Every CGI door job in Mesquite runs the same sequence. Nothing gets skipped, and nothing gets paid for until you’ve seen it.
- 1
Measured survey. We measure the rough opening, check the frame for plumb and square, photograph the existing door and serial label, and confirm the swing and handing. You keep a copy of that survey.
- 2
Written scope and price. The quote can’t differ from the survey document – that’s Haven Clause 1. If the opening needs framing or stucco work to accept the new door, it’s in the number before anyone swings a hammer.
- 3
Parts decision. If we’re replacing hardware or seals, we tell you which parts are CGI OEM and required to hold the warranty, and where a quality aftermarket part performs the same or better for less. You decide with the trade-offs on paper.
- 4
Install. Old door out, framing checked and repaired as needed, new CGI unit set, shimmed, and flashed to the wall. Hurricane-rated entries get anchored to the CGI spec, not to a guess.
- 5
Test. We open, close, latch, and lock the door several times, check the reveal at three points, and confirm the threshold doesn’t leak under a hose test on entries.
- 6
Photo record. Before, during, and after photos go in your file. Every job leaves with one, under Haven Clause 4, at no extra cost.
What CGI Door Installation Costs in Mesquite

These are real ranges for CGI doors installed around Mesquite, not teaser numbers. Your written quote replaces them after the survey.
| Scenario | Typical range |
|---|---|
| CGI entry door replacement, frame reused | $1,450 – $2,600 |
| Hurricane-rated CGI front and entry door | $2,400 – $4,800 |
| CGI French or double door, two leaves | $3,200 – $6,500 |
| Storm or exterior door, aluminum | $1,100 – $2,200 |
| Re-hang and reseal existing CGI door (no new slab) | $280 – $650 |
What moves the number: whether the frame is sound, whether the opening needs stucco or framing work, impact glass versus standard, and whether the swing has to change. We name every line on the quote. For an exact figure on your opening, call (888) 268-5117 – estimates are free, and they come written.
Why Mesquite Homeowners Call Sightline Windows & Doors Mesquite for CGI Work
We install CGI because they build a door that holds up to a desert, and we install it under the Haven Standard: have it in writing, arrive on schedule, verified crews, evidence on every job, no surprises. Every technician is background-checked and uniformed, identified by license number before arrival, with up to 14 years of experience on jobs like yours.
Every Mesquite CGI job is covered by the 365-Day Done Right Promise – if it’s not done right, we make it right. If a CGI part can’t be sourced quickly, we say so and quote the CWS or PGT equivalent on the same page instead of stalling the door. Calls get answered by a live person, 24/7, not a voicemail queue. And if you’ve got a competitor’s written estimate for a CGI door, bring it to us – the second opinion is free.
FAQs

No, as long as the door is installed to CGI’s published spec and the fasteners, flashing, and hardware meet their requirements. We keep the serial label and photograph it before demo, which is what makes a claim clean if anything comes up later. Ask for the survey and photo record at any point; call (888) 268-5117 with questions before you book.
Yes. CGI builds to order and ships from Miami, so most complete door units reach Mesquite in about three to five weeks. Hardware, seals, and thresholds are usually faster. On rare out-of-stock parts, we’ll quote the CWS or PGT match on the same written scope and let you choose. Call (888) 268-5117 for current lead times on your series.
It depends on the frame, not the door. If the slab warps, the frame shifts, or the hardware won’t hold adjustment, replacement usually makes more sense than chasing a repair. If the frame is plumb and the problem is a seal, a hinge, or a threshold, repair wins on cost every time. We’ll tell you which after the survey, in writing.
Yes. CGI’s impact-rated entry and storm doors are built for wind-borne debris, and we install them to spec on anchor spacing and flashing. If your homeowner’s coverage asks for a wind rating, we’ll document the product on your job file so you have it on paper.
Most CGI door installs in Mesquite land between $1,450 and $4,800, with French and double doors reaching $6,500. The written price is the final price – if the survey missed something like hidden framing rot, we stop, show you, and requote in writing before continuing. Call (888) 268-5117 for an exact figure; estimates are free.
Get a Written CGI Door Price in Mesquite
If you’re ready to put a number on your CGI door project, call (888) 268-5117 and we’ll set up the measured survey. You’ll get a written quote you can keep, a crew that shows up on schedule under Haven Clause 2, and a photo record when the job is done. Estimated free, price written before work starts, and backed by the 365-Day Done Right Promise.
Written by the team at Sightline Windows & Doors Mesquite, serving Mesquite and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Mesquite

Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Mesquite Services
What Neighbors Say About Sightline Windows & Doors Mesquite
